Part No.
NSSHOEU with earth conductor as core screens in acc. with DIN
VDE 0250, Part 812
Application
For the connection of mobile equipment and machines under very
high mechanical loads in dry and damp areas, outdoors and in explosion
hazard areas, particularly in mining, and at quarries and building
sites. NSSHOEU cables can be used for fixed connections e.g. in
provisional constructions or at building sites as well as in conveyor
systems and machines. Systems with guided cables generally require
special cable designs with additional features differing from the
NSSHOEU standard. |
Construction
Fine stranded conductor of tin-coated copper wires, insulation
of heat resisting 3G13 rubber compound on EPR basis, coloured, earth
conductor distributed as spiral of tinned copper wires over core
insulating coverings, cores laid up, control cores can be laid in
the interstices, film wrap, inner sheath of GM1 b, rubber compound,
outer sheath of chlorinated rubber compound 5GM5, yellow, abrasion-proof,
notch-resistant, oil-resistant and flame retardant. In the case
of small conductor cross-sections and over 3 cores, the earth conductor
is located concentrically between the inner and outer sheaths. This
position is indicated by the word "KON" behind the earth
conductor cross-section. |
